- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
矩形线圈HFSS仿真
录入:edatop.com 点击:
不知道怎么回事,单线圈模型用参数赋值以后总显示这个问题,*Global - Messages
[warning] Left-alt + shift is currently used by the system to toggle the input language. It is also used in some portions of this application, which may cause the input language to change unexpectedly.
signal coil_result2 (F:/Helmholtz/Single coil/)
HFSSDesign1 (DrivenModal)
[error] Adaptive solution setup, process hf3d error: Matrix solver exception: out of memory.. (7:13:22 下午 四月 07, 2013)
[error] Unable to create child process: hf3d. (7:13:22 下午 四月 07, 2013)
[error] Simulation completed with execution error on server: Local Machine. (7:13:23 下午 四月 07, 2013)
各位大侠帮忙看看哪里出问题了啦 signal coil_result.rar (25 K) 下载次数:6 这个是我的模型
[warning] Left-alt + shift is currently used by the system to toggle the input language. It is also used in some portions of this application, which may cause the input language to change unexpectedly.
signal coil_result2 (F:/Helmholtz/Single coil/)
HFSSDesign1 (DrivenModal)
[error] Adaptive solution setup, process hf3d error: Matrix solver exception: out of memory.. (7:13:22 下午 四月 07, 2013)
[error] Unable to create child process: hf3d. (7:13:22 下午 四月 07, 2013)
[error] Simulation completed with execution error on server: Local Machine. (7:13:23 下午 四月 07, 2013)
各位大侠帮忙看看哪里出问题了啦 signal coil_result.rar (25 K) 下载次数:6 这个是我的模型
网友回复:
自己占一楼,大侠们谢谢啦
网友回复:
都木有人回么?问题解决了,貌似是直径设的太小,网格划分过于精细造成的,可是当把直径修改至5mm以后,模型可以运行了,但是求解出来却没有磁场。不知道什么情况啊
网友回复:
来个大神,帮一把吧
申明:网友回复良莠不齐,仅供参考。如需专业帮助,请咨询本站专家,并推荐学习李明洋老师的HFSS视频培训课程。
申明:网友回复良莠不齐,仅供参考。如需专业解答,请学习易迪拓培训专家讲授的HFSS视频培训教程。
上一篇:HFSS仿真LVDS差分线,有个收敛曲线图,请问有什么意义
下一篇:线天线怎么仿真