- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
Impedance matching in FEKO 7
录入：edatop.com 点击：
Hello everyone!
In my current project of designing a fractal patch antenna based on the Sierpinski gasket I'm not able to achieve a S11 parameter. I've tried using pin feed and λ/4 transformer (using Smith chart) but they don't seem to work. In theory the antenna's impedance should be matched perfectly, but in POSTFEKO the results are not as expected. I want to ask if there is anything specific I need to know when configuring FEKO to solve the S-Parameter for my design.
My antenna:
Height of the big triangle: 61 mm.
εr of the dielectric: 4.8
Material height: 1.6 mm
In my current project of designing a fractal patch antenna based on the Sierpinski gasket I'm not able to achieve a S11 parameter. I've tried using pin feed and λ/4 transformer (using Smith chart) but they don't seem to work. In theory the antenna's impedance should be matched perfectly, but in POSTFEKO the results are not as expected. I want to ask if there is anything specific I need to know when configuring FEKO to solve the S-Parameter for my design.
My antenna:
Height of the big triangle: 61 mm.
εr of the dielectric: 4.8
Material height: 1.6 mm
CST微波工作室培训课程套装，专家讲解，视频教学，帮助您快速学习掌握CST设计应用
上一篇：Any FEKO user's who've done BIG geometry?
下一篇：Using Edge Port With Infinite Planar Substrate in CAD FEKO
