5.4版本下设置了波端口，但是看不了驻波！望高手解惑！

happy new year,thank you

Happy牛year too！
Thank you ?

我的也看不成啊、是不是5.4版本的都看不成呢

请加S参数需求计算！

我的也是，但是加了S参数需求求解也没有驻波曲线，就没有源数据，只能看s参数。
不知道是不是5.4版本的波导端口还没有完善?

add a source data graph->VSWR打点，就在S11的下面

楼上的，关键是按了E那个选项，没有数据啊，即是没有源数据，也就点不了S11下面的VSWR了。
你试过么

下面的範例你看過了嗎?假使有問題簡化傳上來吧.
RECTANGULAR HORN ANTENNA PROJECT 1-1
1 “Walk through” project: A rectangular horn
1.1 Example overview
This example uses a completed model to familiarise the user with the FEKO Suite work
flow and is intended for users with no or very little experience with the FEKO Suite.
It uses the same horn model as the demo video, hence it is recommended that you first
watch the demo before working through this example4.
The geometry used is a rectangular horn that is excited by a probe feed in a short
waveguide section. The model utilises symmetry to reduce memory requirements and to
increase the calculation speed.
Figure 1-1: Illustration of the horn antenna. (The geometry is shown slightly transparent so that
the pin feed is visible.)

楼上什么意思啊?那个例子我看了，和波端口没什么联系啊。

我的意思是你....先執行一下範例難是否可行..再回來看您的問題..
假使你還是找不出問題再把問題上傳吧..