• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 电子设计 > PCB设计 > Altium Designer和Protel > 仿真出现的错误的问题

仿真出现的错误的问题

录入:edatop.com     点击:

在用protel99se画PCB原理图时运行 simulate->run时,产生了好多的错误,错误如下,不知道哪位牛人能

给出解答啊~~~~!

C1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C3 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C3 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C3 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C4 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C4 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C4 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>

还有个问题:

如果这个运行成功了能够自动的SPICE仿真吗?

昏,难道没有人知道啊~~~~~~

新近才知道,

用的元件不对,应该用SIM。LIB库里面的元件才能进行SPICE仿真

Cadence Allegro 培训套装,视频教学,直观易学

上一篇:***PROTEL99如何使PCB底层镜像显示(让底层和实际板子位置一样,而不是左右相反)***
下一篇:求Protel 99SE TSOP48的标准封装

PCB设计培训课程推荐详情>>

  网站地图