- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
哪位用过XREF schematic？帮忙看一看
录入：edatop.com 点击：
我想用，但是老是出错，出错报告说：
Note: Horizontal zone definitions in XREF.CFG do not match ViewDraw drawing size.
Drawing width is 2200.
Note: Vertical zone definitions in XREF.CFG do not match ViewDraw drawing size.
Drawing height is 1700.
There are 2 note(s)
但是我分明就是2200X1700的。
我的XREF.CFG设置是这样的：
| Sheet layout for a C size sheet.
| horizontal 2200, vertical 1700.
|NUM_HOR_ZONES 5
|NUM_VER_ZONES 2
|hor_zone_size 440
|ver_zone_size 850
|HOR_ZONE_NAMES 5 4 3 2 1 | Reads left to right
|VER_ZONE_NAMES A B | Reads bottom to top
Note: Horizontal zone definitions in XREF.CFG do not match ViewDraw drawing size.
Drawing width is 2200.
Note: Vertical zone definitions in XREF.CFG do not match ViewDraw drawing size.
Drawing height is 1700.
There are 2 note(s)
但是我分明就是2200X1700的。
我的XREF.CFG设置是这样的：
| Sheet layout for a C size sheet.
| horizontal 2200, vertical 1700.
|NUM_HOR_ZONES 5
|NUM_VER_ZONES 2
|hor_zone_size 440
|ver_zone_size 850
|HOR_ZONE_NAMES 5 4 3 2 1 | Reads left to right
|VER_ZONE_NAMES A B | Reads bottom to top
Cadence Allegro 培训套装，视频教学，直观易学
上一篇：装MENTOR WG2005的问题
下一篇：如何用mentor EN打开PCB文件
