EE2007.1 终于发布了

等了3个月 2005.3的下一个版本终于出现了， 一起庆祝。

正下载中！不知道2005.3的license能不能用?

祝大家春节快乐！

希望放到本站FTP上分享.

下完了，没license,LZ有吗?

2005.3的lic不可以用?

我只有2005.1,放到2005.3也是可以，EE2007却不行，你的可以?

哪里下的,给个网址也...兄弟们.

这个最新的版本是用什么名字，，搜也搜不到。呵呵，，，我只用到MENTOR WG EXP SP3的。

LZ具体点啊。

www.mentor.com下的，EE=expedition enterprise

bafnwf上传到ftp网站,让大家分享一下吧

新年快乐！请大侠们共享一下吧，不知道EXP2005.3的PJ还能用不！谢谢！

请问EE2007.1能打开boardstationRE的文件吗?

我怎么看不到啊

 怎么大家好像兴趣不大呀,,谁装了,截几张图看看, 过一下眼瘾嘛...

有人能够提供下载吗?眼馋啊！

是啊。小编发个消息，就不回话了。我在mentor的网站没有找到可以下载expedition enterprise的地方。哪位知道请把网址发给我们拉。

这次升级变动太多了，原来的PCB文件必须从原理图更新升级才能打开，而原理图也必须是用CDB流程的才能升级打开，新建原理图指定库文件时又告诉库也必须升级，真是无语了。并且升级后就不能后退了，所以使用前要三思。

小编是WG的高手哦！请问新版本的在那些方面有重大改进呢?谢谢！

整个项目数据结构改变了。dx方面变化较大，Project Setup更简单了，和exp的集成更紧密了，不用像原来那么多繁琐的设置，外观和菜单也有很多变化。exp铺铜方面有很大变化。还集成了RF Design。还有CES等也有较大变化。其他还在摸索中。

现在最要命的是原来没用CDB的项目如何打开?

Ensuring a complete 2005.x CDB supported Central Library exists
1.Import all DxDesigner “Symbol Libraries” into Central Library Symbol partitions.
􀂾
Customers can utilize the Library Migration Wizard provided with the 2005.x version of Library Manager

2.All Cells & Padstacks are assumed to be pre-existing in the Central Library, as they should have been previously used in the existing Netlist driven Expedition designs.

3.Manually input or Import ASCII the Part Database (PDB) data into Central Library Part partitions.
􀂾
To utilize the Part Editor Import ASCII capability, a user must physically place every symbol into a DxDesigner schematic and perform a “Netlist - Package” through to Expedition. Once successfully Packaged, the software creates a “PDB.hkp” file that contains all the packaging data, which then can be imported into the Part Editor within the Central Library.

4.When a complete 2005.x Central Library is in place, a pilot (test) project should be used to validate the new Central Library structure. Once validated, new 2005.x projects may continue with the CDB flow.

Convert DxDesigner Netlist flow project to DxDesigner CDB flow project
1.Open the netlist flow pilot project with 2005.x DxDesigner
2.Within DxDesigner modify the Design Configuration settings to the following:
􀂾
     Enable 􀀻 Library Manager Central Library option & define Central Library path
􀂾
􀀻 Expedition PCB → Constrain in CES - Enable
􀂾
􀀻 Expedition PCB → Use CDB Flow - Enable
3. Compile and Package CDB.
􀂾
If packaging errors occur, typically this is the result of an incorrect PDB definition(s) or cell/part data mismatch and will need to be resolved before continuing. Refer to the “pcb.err” file for detailed Packaging error information.
4.After a successful Packager is performed, run Forward to Expedition and execute Forward Annotate when Expedition opens and the system prompts the user to continue. A successful Forward Annotation finalizes the transition of a 2005.x Netlist flow project to a 2005.x CDB flow project.
5.Now the 2005.x CDB flow project can be migrated to a 2007 design flow using wizard steps.

都是强人呀,,,好想下一个,,,,,怎么没人截图看看呢?

小编是个热心人，总能给大家带来惊喜！是我个人学习的楷模！

EE2007.1界面...........................

简直就是DC

会不会有BUG?要等补丁出来吧

分享才能庆祝呀，可否分享一下呢?

Just Learning

哪里有的下啊