• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 电子设计 > PCB设计 > Mentor PCB设计问答 > 求助exp2005导入网表

求助exp2005导入网表

录入:edatop.com     点击:
orcad的网表导入到EXP2005 sp1过程,结果转网表提示失败,在file->file viewer里提示如下:

Number of Part Numbers: 25
          Part Numb: BNC-4 -> Vend Part: BNC-4
          Part Numb: CE/8MM -> Vend Part: CE/8MM
          Part Numb: C0603 -> Vend Part: C0603
          Part Numb: C0805 -> Vend Part: C0805
          Part Numb: C1206 -> Vend Part: C1206
          Part Numb: DIODE2 -> Vend Part: DIODE2
          Part Numb: FPBGA-233_17X17 -> Vend Part: FPBGA-233_17X17
          Part Numb: HC49U -> Vend Part: HC49U
          Part Numb: HEADER_8X2 -> Vend Part: HEADER_8X2
          Part Numb: HEADER4 -> Vend Part: HEADER4
          Part Numb: HOLD/3.3 -> Vend Part: HOLD/3.3
          Part Numb: L-12X12X7_SMD -> Vend Part: L-12X12X7_SMD
          Part Numb: L0805 -> Vend Part: L0805
          Part Numb: MASK -> Vend Part: MASK
          Part Numb: PCI_XPRESS_X1 -> Vend Part: PCI_XPRESS_X1
          Part Numb: R0603 -> Vend Part: R0603
          Part Numb: SOT23M2 -> Vend Part: SOT23M2
          Part Numb: SOT223 -> Vend Part: SOT223
          Part Numb: SO8NB -> Vend Part: SO8NB
          Part Numb: TEST_60X35-H -> Vend Part: TEST_60X35-H
          Part Numb: TP/SMD/D1.0 -> Vend Part: TP/SMD/D1.0
          Part Numb: TQFP-64_9X9-P0.4 -> Vend Part: TQFP-64_9X9-P0.4
          Part Numb: 8P4R-A-SMD -> Vend Part: 8P4R-A-SMD
          Part Numb: 1206N -> Vend Part: 1206N
          Part Numb: 7343 -> Vend Part: 7343
     Number of Part Names: 0
     Number of Part Labels: 0
   INTERNAL S/W ERROR:  A part pin has no alphanumeric pin number
      on part number TEST_60X35-H.
      If a Parts DataBase other than the local one is corrected,
      please be sure to run Packager in the overwrite mode or
      Forward Annotation in the 'Replace Local Parts' mode.  Otherwise, be
      sure not to use these modes or the corrections will be lost.
     INTERNAL S/W ERROR:  A part pin has no alphanumeric pin number
     
      on part number L-12X12X7_SMD.
      If a Parts DataBase other than the local one is corrected,
      please be sure to run Packager in the overwrite mode or
      Forward Annotation in the 'Replace Local Parts' mode.  Otherwise, be
      sure not to use these modes or the corrections will be lost.
     INTERNAL S/W ERROR:  A part pin has no alphanumeric pin number
      on part number TEST_60X35-H.
      If a Parts DataBase other than the local one is corrected,
      please be sure to run Packager in the overwrite mode or
      Forward Annotation in the 'Replace Local Parts' mode.  Otherwise, be
      sure not to use these modes or the corrections will be lost.
     INTERNAL S/W ERROR:  A part pin has no alphanumeric pin number
      
     on part number L-12X12X7_SMD.
      If a Parts DataBase other than the local one is corrected,
      please be sure to run Packager in the overwrite mode or
      Forward Annotation in the 'Replace Local Parts' mode.  Otherwise, be
      sure not to use these modes or the corrections will be lost.
     116 nets were found containing 516 pins
     145 components were found
     INTERNAL S/W ERROR:  A part pin has no alphanumeric pin number
      on part number L-12X12X7_SMD.
      If a Parts DataBase other than the local one is corrected,
      please be sure to run Packager in the overwrite mode or
      Forward Annotation in the 'Replace Local Parts' mode.  Otherwise, be
      sure not to use these modes or the corrections will be lost.
      INTERNAL S/W ERROR:  A part pin has no alphanumeric pin number
      on part number TEST_60X35-H.
      If a Parts DataBase other than the local one is corrected,
      please be sure to run Packager in the overwrite mode or
      Forward Annotation in the 'Replace Local Parts' mode.  Otherwise, be
      sure not to use these modes or the corrections will be lost.
     The PDB supply data has 2 errors.
      Please update the Parts DataBase to provide this information
      and then run DataBase Load.  If a Parts DataBase other than
      the local one is corrected, please be sure to run DataBase
      Load in the 'Replace Local Parts' mode.  Otherwise, be sure
      not to use this mode or the corrections will be lost.
     DataBase Load is being terminated with 2 errors and 0 warnings.
      Logic Data has NOT been Compiled.

求助:是我的PDB有问题还是那里出了问题?先谢谢各位老大!

A part pin has no alphanumeric pin number
元件的管脚没有序号?

Cadence Allegro 培训套装,视频教学,直观易学

上一篇:急Expedition出gerber问题
下一篇:Expedition器件封装替换问题

PCB设计培训课程推荐详情>>

  网站地图