- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
导出ODB++ 提示报警
录入：edatop.com 点击：
WARNING: Since the starting (6.7322835,7.6968501)(mm) and the ending (6.7322831,7.6968504)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
WARNING: Since the starting (1.3133467,3.0012447)(mm) and the ending (1.3133473,3.0012450)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
报警提示的坐标都是在原点附近的，我尝试着把原点设置到-100，-100的位置，报警的坐标也就涨到10，10的样子，不像是PCB上面的线，不知道哪边设置有问题
WARNING: Since the starting (1.3133467,3.0012447)(mm) and the ending (1.3133473,3.0012450)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
报警提示的坐标都是在原点附近的，我尝试着把原点设置到-100，-100的位置，报警的坐标也就涨到10，10的样子，不像是PCB上面的线，不知道哪边设置有问题
thanks
Cadence Allegro 培训套装，视频教学，直观易学
上一篇：EEVX自行调用nse新建symbol，这是为什么？
下一篇：mentor EE 7.95 Z怎么把别人的库保全到整机的库里面 ？
