• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 电子设计 > PCB设计 > Orcad技术问题 > High and low temperature test chamber

High and low temperature test chamber

录入:edatop.com     点击:
        Chamber Structure
        The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic(linpin).
A large observation window is set on the chamber door.
A test hole with 25mm, or 50mm or 100mm diameter is set on the left of the chamber body.
A fixable PU moving wheel is adopted on the bottom of the test chamber(linpin).
        Controller
        The temperature controller adopts fully imported (Japanese PKC) meter with touch keys.
P.I.D automation calculation function is available.
        Cooling and Air Path Circulation System
        The cooler adopts original French Tecumseh fully-closed compressor(linpin).
The cooling system adopts single or dual low-temperature loop system design.
        Standards Applied
        GB/T2423.1-2001 and GB/T2423.2-2001
        Specs and Technical Parameters
        Model(cm)
GDW-100        GDW-225
GDW-500        GDW-800        GDW-010
Workroom Dimensions        45*45*50        50*60*75
80*70*90        80*100*100        100*100*100
Exterior Dimensions        105*97*176.5        105*102*200        132*132*217
147*152*231.5        167*152*231.5
Power(@-40℃)        4.5(KW)        5.5 (KW)        8.0(KW)         9.0(KW)        11.0(KW)
Temperature Range
A:-20℃~150℃ B:-40℃~150℃ C:-60℃~150℃ D:-70℃~150℃
Fluctuation/Evenness        ≤±0.5℃/≤±2℃
Temperature Rise Speed
1.0~3.0℃/min
Temperature Fall Speed
0.7~1.0℃/min

看不懂。

We used Esspec stand alone unit; external water suppy for hi humidity purpose.

Cadence Allegro 培训套装,视频教学,直观易学

上一篇:线路板的散热方式有哪些
下一篇:orCAD9.1的Capture CIS界面上没有Pspice命令?

PCB设计培训课程推荐详情>>

  网站地图