• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 电子设计 > PCB设计 > Orcad技术问题 > 请帮忙解决:ORCAD原理图BGA多部分组成产生问题

请帮忙解决:ORCAD原理图BGA多部分组成产生问题

录入:edatop.com     点击:

由于BGA U11引脚多分成了14部分,在放置过程中有修改引脚,在DRC时产生了如下问题,

Checking for Invalid References
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 02.FBA MEMORY INTERFACE (4.90, 1.90)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 05.FBC MEMORY INTERFACE (2.00, 1.90)
[DRC0026] This reference has already been assigned to a different package type. U3
S318, 06.FRAME BUFFERC (6.70, 9.90)
[DRC0026] This reference has already been assigned to a different package type. U4
S318, 06.FRAME BUFFERC (6.70, 12.50)
[DRC0026] This reference has already been assigned to a different package type. U3
S318, 06.FRAME BUFFERC (3.30, 1.50)
[DRC0026] This reference has already been assigned to a different package type. U4
S318, 06.FRAME BUFFERC (11.10, 12.40)
[DRC0026] This reference has already been assigned to a different package type. U3
S318, 06.FRAME BUFFERC (9.00, 9.90)
[DRC0026] This reference has already been assigned to a different package type. U4
S318, 06.FRAME BUFFERC (9.00, 12.50)
[DRC0026] This reference has already been assigned to a different package type. U3
S318, 06.FRAME BUFFERC (4.70, 10.00)
[DRC0026] This reference has already been assigned to a different package type. U4
S318, 06.FRAME BUFFERC (12.50, 1.50)
[DRC0026] This reference has already been assigned to a different package type. Q8
S318, 19.PEX ZERO DELAY BUFFER (13.20, 5.00)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 07.DECOUPLING BUFFERC (15.70, 1.70)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 08.PRIMARY DISPLAY(DACA) (3.00, 5.60)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 09.Secondary display(DACC) (2.80, 5.70)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 10.INTERNAL TMDS LINK A&B (5.80, 3.50)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 11.INTERNAL TMDS LINK C&D (5.70, 3.50)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 12.G3VIP/MIOB (4.90, 2.80)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 12.G3VIP/MIOB (4.90, 9.20)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 14.DACB (9.50, 10.90)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 15.4-PIN&12-PIN VIDEO HEADERS (6.30, 11.10)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 16.JTAG/BIOS ROM/HDCP ROM/FAN (3.90, 9.50)
[DRC0026] This reference has already been assigned to a different package type. U11
S318, 16.JTAG/BIOS ROM/HDCP ROM/FAN (4.40, 0.80)
[DRC0026] This reference has already been assigned to a different package type. U12
S318, 03.FRAME BUFFERA (9.60, 12.00)
[DRC0026] This reference has already been assigned to a different package type. U12
S318, 03.FRAME BUFFERA (5.30, 12.00)
[DRC0026] This reference has already been assigned to a different package type. U12
S318, 03.FRAME BUFFERA (11.70, 11.90)
[DRC0026] This reference has already been assigned to a different package type. U12
S318, 03.FRAME BUFFERA (7.30, 12.00)

请帮忙解决,谢谢!

对于这种多引脚的东西,最好把库建好了再画线路图,在绘图过程中最好不要修改库,

建库后,在画原理图时发现零件脚序号有误,在原理图中更新了当前部分,结果重复操作多次后,发现BGA U11有10多个PACKET应用到原理图中了,此时再改零件编号到一致,结果出现了上述错误,无法产生NETLIST给其他LAYOUT软件用。现想重新建零件,将当前应用在原理图零件部分COPY下来,但PASTE时没有了脚的编号,如果重新定脚的编号又有大量工作要做,请问是否有解决方法?望ORCAD高手指点

Cadence Allegro 培训套装,视频教学,直观易学

上一篇:关于EDA软件的比较
下一篇:三个臭皮匠顶个诸葛亮

PCB设计培训课程推荐详情>>

  网站地图