求救：capture到allegro时出现如下错误

求救:capture到allegro时出现如下错误，在desigen rule check选项中没有Duplicate Pin Name可选项，但是我不更改管脚名称。我如何解决这个问题呢?小弟是莱鸟，请多多指教，鄙人不胜感激。

#5 Error   [ALG0050] Duplicate Pin Name "DNC" found on Package 5014R_0 , U11 Pin Number E2: SCHEMATIC1, PHY2 (63.50, 35.56). Please renumber one of these.
#6 Error   [ALG0050] Duplicate Pin Name "DNC" found on Package 5014R_0 , U11 Pin Number E3: SCHEMATIC1, PHY2 (63.50, 35.56). Please renumber one of these.
#7 Error   [ALG0050] Duplicate Pin Name "DNC" found on Package 5014R_0 , U11 Pin Number E4: SCHEMATIC1, PHY2 (63.50, 35.56). Please renumber one of these.
#8 Error   [ALG0050] Duplicate Pin Name "DNC" found on Package 5014R_0 , U11 Pin Number D3: SCHEMATIC1, PHY2 (63.50, 35.56). Please renumber one of these.

把dnc管脚改为power属性或加一个NC属性,要不把DNC命名为dnc1,dnc2....也行

建议还是所有的pin name 都不要复用，即使是NC  后面也加上数字以示区别