- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
出不了光绘,请好心人指点一下
录入：edatop.com 点击：
情况描述：
1：在使用“Gerber 6x00”出片，可以出片，但是通过cam950软件看，好多东西都没u，via，
2：如果用“rs274x”出，老是提示如下错误，
FLASH SYM NOGERB 180.000 YES DARK
FLASH SYM NOGERB 180.000 NO DARK (undefined)
PAD SHAPE L3 0.000 NO DARK
PAD SHAPE L4 0.000 NO DARK
PAD SHAPE L1 0.000 NO DARK
PAD SHAPE L2 0.000 NO DARK
ERROR: aborting film - Undefined aperture symbol, cannot continue.
See APERTURES USED table in this file for symbols to provide.
================================================================
PROCESSING FILM < L2_POWER.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Suppress shape fill on neg film NO
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative YES
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.02000 DARK
CIRCLE 0.02500 DARK
CIRCLE 0.03500 CLEAR
FLASH SYM SOLID 0.000 NO CLEAR (undefined)
ERROR: aborting film - Undefined aperture symbol, cannot continue.
See APERTURES USED table in this file for symbols to provide.
ARTWORK Error
搞了好久了，搞不定，请大家指点一直把，谢谢！
1：在使用“Gerber 6x00”出片，可以出片，但是通过cam950软件看，好多东西都没u，via，
2：如果用“rs274x”出，老是提示如下错误，
FLASH SYM NOGERB 180.000 YES DARK
FLASH SYM NOGERB 180.000 NO DARK (undefined)
PAD SHAPE L3 0.000 NO DARK
PAD SHAPE L4 0.000 NO DARK
PAD SHAPE L1 0.000 NO DARK
PAD SHAPE L2 0.000 NO DARK
ERROR: aborting film - Undefined aperture symbol, cannot continue.
See APERTURES USED table in this file for symbols to provide.
================================================================
PROCESSING FILM < L2_POWER.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 5.00
Suppress shape fill on neg film NO
Mirror code NONE
Rotate angle NONE
Offset x: 0.00
Offset y: 0.00
Plot negative YES
Suppress unconnected internal pads NO
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.02000 DARK
CIRCLE 0.02500 DARK
CIRCLE 0.03500 CLEAR
FLASH SYM SOLID 0.000 NO CLEAR (undefined)
ERROR: aborting film - Undefined aperture symbol, cannot continue.
See APERTURES USED table in this file for symbols to provide.
ARTWORK Error
搞了好久了，搞不定，请大家指点一直把，谢谢！
是不是你建的封装有问题啊?
建个以SOLID这个名字的 flash就可以了
缺少FLASH，需要在相应的封装添加
谢谢大家，已经解决，小编太牛。
是因为出２７４Ｘ要真ＦＬＡＳＨ！
好像是封装做的有问题的。缺少FLASH焊盘。
额，这么明显的错误……
是缺少FLASH SYM NOGERB 180.000 NO DARK (undefined
如果FLASH 不是和器件封装做在一起的，建议把库的路径指向库，出光绘时会自动读取FLASH 的信息
学习了。
