导入网络表问题

路径设置有问题。

我也有同感

正解，
论坛上有路径设置的帖子

#1   WARNING(SPMHNI-184): Device library warning detected.
WARNING: J7 component device pin number mismatch; cannot replace.
#2   WARNING(SPMHNI-192): Device/Symbol check warning detected.
ERROR(SPMHNI-196): Symbol 'CON2X11_127-2X11' for device 'CON20_CON2X11_127-2X11_CON2X10_' has extra pin '21'.
ERROR(SPMHNI-196): Symbol 'CON2X11_127-2X11' for device 'CON20_CON2X11_127-2X11_CON2X10_' has extra pin '22'.
#1   ERROR(SPMHNI-191): Device/Symbol check error detected.
ERROR(SPMHNI-195): Symbol 'CON2X10_127-2X10' for device 'CON22_0_CON2X10_127-2X10_CON2X1' is missing pin '21'.
ERROR(SPMHNI-195): Symbol 'CON2X10_127-2X10' for device 'CON22_0_CON2X10_127-2X10_CON2X1' is missing pin '22'.
我是用FPM工具做的，哪个解决下?

回复 jiaoweiyong 的帖子
不过你用什么做的，你原理图跟PCB封装的pin脚数量都不一样那肯定是错的了

我用FPM工具做的就是这样子的，但是我手工做的就没有问题?
很怪的哦！

#1   WARNING(SPMHNI-184): Device library warning detected.
WARNING: J7 component device pin number mismatch; cannot replace.
这个是你做封装建的元件放的位置没有在原点 X 0 0，你放的位置 大于 你导的PCB设置的PCB图的大小！  你把你的新建的封装放到原点就OK了，通常封装都要放到原点的哦！

#2   WARNING(SPMHNI-192): Device/Symbol check warning detected.
ERROR(SPMHNI-196): Symbol 'CON2X11_127-2X11' for device 'CON20_CON2X11_127-2X11_CON2X10_' has extra pin '21'.
ERROR(SPMHNI-196): Symbol 'CON2X11_127-2X11' for device 'CON20_CON2X11_127-2X11_CON2X10_' has extra pin '22'.
#1   ERROR(SPMHNI-191): Device/Symbol check error detected.
ERROR(SPMHNI-195): Symbol 'CON2X10_127-2X10' for device 'CON22_0_CON2X10_127-2X10_CON2X1' is missing pin '21'.
ERROR(SPMHNI-195): Symbol 'CON2X10_127-2X10' for device 'CON22_0_CON2X10_127-2X10_CON2X1' is missing pin '22'.
是你的封装做的PIN跟你的原理图的PIN不一样，肯定报错的哦！改好了就OK了，
你肯定是PIN22的封装换PIN20的了，你肯定是PIN20的封装换PIN21的了，反了
在原理图里换下封装就OK了（一个多了2个PIN，一个少了2个PIN）

哪个知道加载CADENCE16.3的封装库怎么加?

查下路径