- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
使用OrCAD和PCB Editor设计PCB的基本步骤
录入：edatop.com 点击：
使用OrCAD和PCB Editor设计PCB的基本步骤总结如下：
1. Start Capture and set up a PCB project using the PC Board wizard.
2. Make a circuit schematic using OrCAD Capture.
3. Use Capture to generate a PCB Editor netlist and automatically start PCB Editor.
4. Make a board outline.
5. Position the parts within the board outline.
6. Route the board.
7. Generate manufacturing artwork.
1. Start Capture and set up a PCB project using the PC Board wizard.
2. Make a circuit schematic using OrCAD Capture.
3. Use Capture to generate a PCB Editor netlist and automatically start PCB Editor.
4. Make a board outline.
5. Position the parts within the board outline.
6. Route the board.
7. Generate manufacturing artwork.
Cadence Allegro 培训套装，视频教学，直观易学
上一篇：allegro一次走多条线的时候,不能打过孔,add via那一栏是灰色的
下一篇：Hotfix_SPB16.30.007_wint_1of1
