- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
database check 问题
录入：edatop.com 点击：
出现在以下问题：
****************************************
DBDOCTOR of drawing F:/Production/crown BOT_V1.0 0521a/keyboard/crown_keyboard v1.0.brd
****************************************
WARNING IN PAD STACK name = 220
Illegal null pad
Layer GND
WARNING IN PAD STACK name = UNDRILL
Illegal null pad
ERROR IN SHAPE (-112.01 110.98)
class = ETCH
subclass = TOP
Part of Symbol Def DPAKP2.
Which is part of a padstack as a SHAPE symbol.
SHAPE boundary may not cross itself.
Error cannot be fixed.
ERROR IN SHAPE (-115.00 114.02)
class = ETCH
subclass = TOP
Part of Symbol Def DPAKP2M.
Which is part of a padstack as a SHAPE symbol.
SHAPE boundary may not cross itself.
Error cannot be fixed.
WARNING Run batch DRC to correctly regenerate DRC errs.
3 warnings, 2 errors detected, 0 errors fixed.
出现以上问题！我把整个文件里的东西都删除了还是有这样的提示,
望高手答复！
不胜感激！
****************************************
DBDOCTOR of drawing F:/Production/crown BOT_V1.0 0521a/keyboard/crown_keyboard v1.0.brd
****************************************
WARNING IN PAD STACK name = 220
Illegal null pad
Layer GND
WARNING IN PAD STACK name = UNDRILL
Illegal null pad
ERROR IN SHAPE (-112.01 110.98)
class = ETCH
subclass = TOP
Part of Symbol Def DPAKP2.
Which is part of a padstack as a SHAPE symbol.
SHAPE boundary may not cross itself.
Error cannot be fixed.
ERROR IN SHAPE (-115.00 114.02)
class = ETCH
subclass = TOP
Part of Symbol Def DPAKP2M.
Which is part of a padstack as a SHAPE symbol.
SHAPE boundary may not cross itself.
Error cannot be fixed.
WARNING Run batch DRC to correctly regenerate DRC errs.
3 warnings, 2 errors detected, 0 errors fixed.
出现以上问题！我把整个文件里的东西都删除了还是有这样的提示,
望高手答复！
不胜感激！
应该是封装库的问题
Tools->Padstack->Modify Design Stack
在Option里选 Purge->all 试试
无效就检查一下pad吧
谢谢！已搞定 把焊盘刷新下就可以了
请问，怎么刷新啊?
Cadence Allegro 培训套装，视频教学，直观易学
上一篇：E- No command ID mapping files (allegro ) found in MENUPATH
下一篇：元件封装中焊盘怎样有原来的数字编号改为字母编号
