- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
PADS9.3转Allegro16.3报错
录入：edatop.com 点击：
各位老大，我在pads9.3导出asc文件，然后导入到Allegro16.3时，出现如下问题：
Translating D:/Work_Dir/CNQ4205-3MB8V1.1new.asc.
Using translator version @(#)$CDS: pads_in.exe v16-3-85D 11/3/2009 Copyr 2009 CADENCE DESIGN SYSTEMS.
Reading PADS ASCII file header.
Version = PowerPCB2005.2
Route Layers = 8
Units = MILS
Hatch mode = Vertical / Horizontal
Hatch grid = 2.000000, angle = 0.000000, anti-pad spacing = 0.000315
Initializing new database.
Creating layers.
Reading PADS ASCII file body.
*MISC*
*MISC*
*MISC*
*MISC*
*MISC*
*REUSE*
*TEXT*
*LINES*
*VIA*
*PARTDECAL*
*PARTTYPE*
*PART*
*ROUTE*
Writing routes.
*POUR*
*END*
===============================================================================
PADS layer usage summary:
Layers 1 to 8 are route layers.
LINES:
0 BOARD GEOMETRY - ALL
1 ETCH - TOP
2 ETCH - INTERNAL1
3 ETCH - INTERNAL2
4 ETCH - INTERNAL3
5 ETCH - INTERNAL4
6 ETCH - INTERNAL5
7 ETCH - INTERNAL6
8 ETCH - BOTTOM
9 * Not mapped！
10 * Not mapped！
21 * Not mapped！
26 * Not mapped！
28 * Not mapped！
29 * Not mapped！
COPPER:
1 ETCH - TOP
2 ETCH - INTERNAL1
3 ETCH - INTERNAL2
4 ETCH - INTERNAL3
5 ETCH - INTERNAL4
6 ETCH - INTERNAL5
7 ETCH - INTERNAL6
8 ETCH - BOTTOM
TEXT:
250 * Not mapped！
DECALS:
0 PACKAGE GEOMETRY - SILKSCREEN_TOP
1 PACKAGE GEOMETRY - SILKSCREEN_TOP
20 * Not mapped！
21 * Not mapped！
27 * Not mapped！
28 * Not mapped！
PADS:
0 ETCH - internal_pad_def
1 ETCH - TOP
2 ETCH - INTERNAL1
3 ETCH - INTERNAL2
4 ETCH - INTERNAL3
5 ETCH - INTERNAL4
6 ETCH - INTERNAL5
7 ETCH - INTERNAL6
8 ETCH - BOTTOM
21 * Not mapped！
23 * Not mapped！
VIAS:
0 VIA CLASS - internal_pad_def
1 VIA CLASS - TOP
2 VIA CLASS - INTERNAL1
3 VIA CLASS - INTERNAL2
4 VIA CLASS - INTERNAL3
5 VIA CLASS - INTERNAL4
6 VIA CLASS - INTERNAL5
7 VIA CLASS - INTERNAL6
8 VIA CLASS - BOTTOM
WARNING: 3104 data objects mapped to the UNUSED class were ignored.
===============================================================================
Creating D:/SPB_Data\CNQ4205-3MB8V1.1new.brd.
Loading netlist:
D:/SPB_Data\CNQ4205-3MB8V1.1new.TXT
Total Combined Netlist and Device File Warnings = 13.
Total Combined Netlist and Device File Errors = 0.
See netin.log for details
Writing database.
Creating padstack definitions.
Creating symbols.
Creating independent data.
WARNING ERROR(SPMHDB-205): VOIDs must have same width as their parent SHAPE. Can't create void of shape. iges id 34738. Continuing.
WARNING ERROR(SPMHDB-205): VOIDs must have same width as their parent SHAPE. Can't create void of shape. iges id 34821. Continuing.
WARNING ERROR(SPMHDB-205): VOIDs must have same width as their parent SHAPE. Can't create void of shape. iges id 34893. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 35311. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 38537. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 39292. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 40031. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 40475. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 45063. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 50542. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 53651. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 53690. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 53763. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 55481. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57565. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57606. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57666. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57853. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 59305. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 61472. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 61943. Continuing.
WARNING ERROR(SPMHDB-187): SHAPE boundary may not cross itself. Can't create shape/polygon. iges id 62099. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 62176. Continuing.
WARNING ERROR(SPMHDB-67): The coordinate buffer is incomplete. Can't create shape/polygon. iges id 62357. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 64372. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 66868. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 71682. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 76723. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 81048. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 81365. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 81584. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 82211. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 82304. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 82929. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create void of shape. iges id 83160. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 83680. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 83692. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 83708. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 84332. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 84425. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 84484. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 84713. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85439. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85452. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85453. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85458. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85558. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 86074. Continuing.
Closing database.
Loading constraints...
Translation complete.
Finished reading input file with no errors.
pads里的铜皮都删除了，而且转出的asc文件各个版本都试过了，都是类似问题。请各位老大帮忙一下。谢谢了！
Translating D:/Work_Dir/CNQ4205-3MB8V1.1new.asc.
Using translator version @(#)$CDS: pads_in.exe v16-3-85D 11/3/2009 Copyr 2009 CADENCE DESIGN SYSTEMS.
Reading PADS ASCII file header.
Version = PowerPCB2005.2
Route Layers = 8
Units = MILS
Hatch mode = Vertical / Horizontal
Hatch grid = 2.000000, angle = 0.000000, anti-pad spacing = 0.000315
Initializing new database.
Creating layers.
Reading PADS ASCII file body.
*MISC*
*MISC*
*MISC*
*MISC*
*MISC*
*REUSE*
*TEXT*
*LINES*
*VIA*
*PARTDECAL*
*PARTTYPE*
*PART*
*ROUTE*
Writing routes.
*POUR*
*END*
===============================================================================
PADS layer usage summary:
Layers 1 to 8 are route layers.
LINES:
0 BOARD GEOMETRY - ALL
1 ETCH - TOP
2 ETCH - INTERNAL1
3 ETCH - INTERNAL2
4 ETCH - INTERNAL3
5 ETCH - INTERNAL4
6 ETCH - INTERNAL5
7 ETCH - INTERNAL6
8 ETCH - BOTTOM
9 * Not mapped！
10 * Not mapped！
21 * Not mapped！
26 * Not mapped！
28 * Not mapped！
29 * Not mapped！
COPPER:
1 ETCH - TOP
2 ETCH - INTERNAL1
3 ETCH - INTERNAL2
4 ETCH - INTERNAL3
5 ETCH - INTERNAL4
6 ETCH - INTERNAL5
7 ETCH - INTERNAL6
8 ETCH - BOTTOM
TEXT:
250 * Not mapped！
DECALS:
0 PACKAGE GEOMETRY - SILKSCREEN_TOP
1 PACKAGE GEOMETRY - SILKSCREEN_TOP
20 * Not mapped！
21 * Not mapped！
27 * Not mapped！
28 * Not mapped！
PADS:
0 ETCH - internal_pad_def
1 ETCH - TOP
2 ETCH - INTERNAL1
3 ETCH - INTERNAL2
4 ETCH - INTERNAL3
5 ETCH - INTERNAL4
6 ETCH - INTERNAL5
7 ETCH - INTERNAL6
8 ETCH - BOTTOM
21 * Not mapped！
23 * Not mapped！
VIAS:
0 VIA CLASS - internal_pad_def
1 VIA CLASS - TOP
2 VIA CLASS - INTERNAL1
3 VIA CLASS - INTERNAL2
4 VIA CLASS - INTERNAL3
5 VIA CLASS - INTERNAL4
6 VIA CLASS - INTERNAL5
7 VIA CLASS - INTERNAL6
8 VIA CLASS - BOTTOM
WARNING: 3104 data objects mapped to the UNUSED class were ignored.
===============================================================================
Creating D:/SPB_Data\CNQ4205-3MB8V1.1new.brd.
Loading netlist:
D:/SPB_Data\CNQ4205-3MB8V1.1new.TXT
Total Combined Netlist and Device File Warnings = 13.
Total Combined Netlist and Device File Errors = 0.
See netin.log for details
Writing database.
Creating padstack definitions.
Creating symbols.
Creating independent data.
WARNING ERROR(SPMHDB-205): VOIDs must have same width as their parent SHAPE. Can't create void of shape. iges id 34738. Continuing.
WARNING ERROR(SPMHDB-205): VOIDs must have same width as their parent SHAPE. Can't create void of shape. iges id 34821. Continuing.
WARNING ERROR(SPMHDB-205): VOIDs must have same width as their parent SHAPE. Can't create void of shape. iges id 34893. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 35311. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 38537. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 39292. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 40031. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 40475. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 45063. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 50542. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 53651. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 53690. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 53763. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 55481. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57565. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57606. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57666. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 57853. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 59305. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 61472. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 61943. Continuing.
WARNING ERROR(SPMHDB-187): SHAPE boundary may not cross itself. Can't create shape/polygon. iges id 62099. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 62176. Continuing.
WARNING ERROR(SPMHDB-67): The coordinate buffer is incomplete. Can't create shape/polygon. iges id 62357. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 64372. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 66868. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 71682. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 76723. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 81048. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 81365. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 81584. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 82211. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 82304. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 82929. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create void of shape. iges id 83160. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 83680. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 83692. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 83708. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 84332. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 84425. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 84484. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 84713. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85439. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85452. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85453. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85458. Continuing.
WARNING ERROR(SPMHDB-187): VOID boundary may not cross itself. Can't create void of shape. iges id 85558. Continuing.
WARNING WARNING(SPMHA1-310): Illegal segment endpoint. Can't create shape/polygon. iges id 86074. Continuing.
Closing database.
Loading constraints...
Translation complete.
Finished reading input file with no errors.
pads里的铜皮都删除了，而且转出的asc文件各个版本都试过了，都是类似问题。请各位老大帮忙一下。谢谢了！
强扭的瓜不甜……
何必强求……
应该可以转的吧
2楼的回答好经典。
我用cadstar转pads也老出错，出来的图只能看看，不能用的。
即使转换成了，也需要大量的修改。
哎，可悲呀
铜皮是不识别的
转时需要一个 pads_in.log 不知道那个在哪里
同楼上，转换时弹出“unbable to open the log file”，不知哪位高手可以解决！
在安装路径下：Cadence\SPB_16.3\tools\pcb\bin\pads_in.ini
