- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
网络表，导入问题，请高手指点，小弟多谢
录入：edatop.com 点击：
#3 WARNING(ORCAP-36006): Part Name "ATOM50186_0_USB_ATOM50186_ATOM50186" is renamed to "ATOM50186_0_USB_ATOM50186_ATOM5".
#4 WARNING(ORCAP-36006): Part Name "SPEAKER_1_MOLEX53398_0271_SPEAKER" is renamed to "SPEAKER_1_MOLEX53398_0271_SPEAK".
#5 WARNING(ORCAP-36006): Part Name "GPS-VPN1513_2_GPS_VPN1513_GPS_VPN1513" is renamed to "GPS-VPN1513_2_GPS_VPN1513_GPS_V".
#6 WARNING(ORCAP-36006): Part Name "SIM CARD_2_SIM_ATOM10050030119_SIM_CARD" is renamed to "SIM CARD_2_SIM_ATOM10050030119_".
#7 WARNING(ORCAP-36006): Part Name "TD028STEB1_3_FPC_361S_TD028STEB1" is renamed to "TD028STEB1_3_FPC_361S_TD028STEB".
#8 WARNING(ORCAP-36006): Part Name "SC6410_18_424_FBGA_27X27_S3C6410 " is renamed to "SC6410_18_424_FBGA_27X27_S3C641".
这些都是什么问题，哪位仙人帮助看看
看了半天，没看懂什么意思?
#4 WARNING(ORCAP-36006): Part Name "SPEAKER_1_MOLEX53398_0271_SPEAKER" is renamed to "SPEAKER_1_MOLEX53398_0271_SPEAK".
#5 WARNING(ORCAP-36006): Part Name "GPS-VPN1513_2_GPS_VPN1513_GPS_VPN1513" is renamed to "GPS-VPN1513_2_GPS_VPN1513_GPS_V".
#6 WARNING(ORCAP-36006): Part Name "SIM CARD_2_SIM_ATOM10050030119_SIM_CARD" is renamed to "SIM CARD_2_SIM_ATOM10050030119_".
#7 WARNING(ORCAP-36006): Part Name "TD028STEB1_3_FPC_361S_TD028STEB1" is renamed to "TD028STEB1_3_FPC_361S_TD028STEB".
#8 WARNING(ORCAP-36006): Part Name "SC6410_18_424_FBGA_27X27_S3C6410 " is renamed to "SC6410_18_424_FBGA_27X27_S3C641".
这些都是什么问题，哪位仙人帮助看看
看了半天，没看懂什么意思?
#10 ERROR(ORCAP-36004): Conflicting values of part name found on different sections of "U1".
Conflicting values: SC6410_18_424_FBGA_27X27_S3C6410 & SC6410_17_424_FBGA_27X27_S3C6410
Property values of "Device","PCB FootPrint", "Class" and "Value" should be identical
on all sections of the part.
#11 ERROR(ORCAP-36018): Aborting Netlisting... Please correct the above errors and retry.
Exiting... "D:\Cadence\SPB_16.5\tools\capture\pstswp.exe" -pst -d "d:\s3c6410\orcad\6410.dsn" -n "d:\s3c6410\orcad\allegro" -c "D:\Cadence\SPB_16.5\tools\capture\allegro.cfg" -v 3 -l 31 -s "" -j "PCB Footprint" -hpath "HPathForCollision"
INFO(ORCAP-32005): *** Done ***
果然没什么人气
DRC检查过没有?
有查，，没有报错，，元件重复那项也有划，，没有发现drc
物理检查勾没有，run physical rule
你的u1对应的symbol是不是分成了很多部分?提示说你的u1各个属性值device footprint value等组合成的part name不一样，查看你的u1的各个部分，是不是有哪一块的属性值不一样，改成一样的即可
你的名字太长了，软件自动截断重命名了，这个可以不用管，不影响生成网表
多谢小编
Illegal character "? found in net "GND_U_液晶屏". Rename the net for correct netlisting.
这里面提到的非法字符，是什么意思，，听看明白
请小编指教
有中文咧
我知道，，这三具中文字，都重命名，改了 里面的汉字已经没有的，整个原理图里，都改过来了，，，可还是提示有非法字符
为什么
重新drc后，没有报错，，再导入网表，就出现：#1 ERROR(ORCAP-36044): Illegal character "? found in net "GND_U_液晶屏". Rename the net for correct netlisting.
#2 ERROR(ORCAP-36018): Aborting Netlisting... Please correct the above errors and retry.
这些，不知道为什么
346342809QQ，欢迎交流，，
小弟新手，请各位前辈多关照
好吧，查了好久，还是没发现问题，之前整个原理图里是有几个中文，但后来都改过来了，原理图中没有中文了，，可在导入网表时还是会报如上的错误，，
整个图都查了，应该不像是中文的问题吧，，，还他说的那个报错的GND是什么意思，，
求高手们指点，，
小弟万谢
:):)
