- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
16.2输出GERBER 出错,求解决
录入:edatop.com 点击:
(------------------------------------------------------------)
( )
( ARTWORK LOG )
( )
( Drawing : test.brd )
( Software Version : unreleased )
( Date/Time : Sat Oct 15 17:29:14 2011 )
( )
(------------------------------------------------------------)
Can't open parameter file ... using default values:
DEVICE-TYPE GERBER6X00
G-CODES NO
STATIONS-PER-WHEEL 24
FILM-SIZE 24000 16000
COORDINATES ABSOLUTE
OUTPUT-UNITS INCHES
FORMAT 5.3
ABORT-ON-ERROR abort film & continue
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
OPTIMIZE YES
SUPPRESS-EQUAL YES
SCALE 1.0
WARNING: Generating english output data from a metric database
may cause slight roundoff error of coordinates in output file.
ARTWORK Error reading apertures.
( )
( ARTWORK LOG )
( )
( Drawing : test.brd )
( Software Version : unreleased )
( Date/Time : Sat Oct 15 17:29:14 2011 )
( )
(------------------------------------------------------------)
Can't open parameter file ... using default values:
DEVICE-TYPE GERBER6X00
G-CODES NO
STATIONS-PER-WHEEL 24
FILM-SIZE 24000 16000
COORDINATES ABSOLUTE
OUTPUT-UNITS INCHES
FORMAT 5.3
ABORT-ON-ERROR abort film & continue
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
OPTIMIZE YES
SUPPRESS-EQUAL YES
SCALE 1.0
WARNING: Generating english output data from a metric database
may cause slight roundoff error of coordinates in output file.
ARTWORK Error reading apertures.
D码没出
问题是我明明已经选择了用RS274X格式,还有它说Can't open parameter file,这个东西哪里弄起来的
DEVICE-TYPE GERBER6X00:
不是RS274X格式!
我开始时选了RS274X的格式的,按错误的提示,它是说没有找到什么文件才转成用6X00的
樓上的再亂猜啊.
明明是Board design 和出Gerber使用的單位不一樣, 公英制換算會有誤差 , 系統在提出這個問題有可能會出現Round Off 的問題.
inch 和mm切换
shape选项里还有个格式没对应上
Cadence Allegro 培训套装,视频教学,直观易学
上一篇:ALLGERO 生成光绘文件出问题,请高手解答(已解决)
下一篇:新手问题,急。