救命啊~~~~~~~这么错误太无稽之还是本人太笨~~~

#1   ERROR(SPMHNI-191): Device/Symbol check error detected.
ERROR(SPMHNI-195): Symbol 'CAP0603' for device 'BNC_CAP0603_AUDIO IN2' is missing pin '3'.
ERROR(SPMHNI-195): Symbol 'CAP0603' for device 'BNC_CAP0603_AUDIO IN2' is missing pin '4'.
ERROR(SPMHNI-195): Symbol 'CAP0603' for device 'BNC_CAP0603_AUDIO IN2' is missing pin '5'.
#15  WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol 'MOLEX-67491-002' for device 'SATA-FEMALE_MOLEX-67491-002_WAT': WARNING(SPMHUT-127): Could not find padstack 42X60RD29.
#16  WARNING(SPMHNI-192): Device/Symbol check warning detected.
ERROR(SPMHNI-196): Symbol 'ND151' for device 'DIODE SCHOTTKY_ND151_ND151' has extra pin 'C'.
ERROR(SPMHNI-196): Symbol 'ND151' for device 'DIODE SCHOTTKY_ND151_ND151' has extra pin 'A'.
ERROR(SPMHNI-195): Symbol 'ND151' for device 'DIODE SCHOTTKY_ND151_ND151' is missing pin '1'.
ERROR(SPMHNI-195): Symbol 'ND151' for device 'DIODE SCHOTTKY_ND151_ND151' is missing pin '2'.

上面两个错误，一个是电容，一个是二极管，都是只有两只脚，也就是pin1 pin2,为什么会这样提示，本人入门新手，已经保证了原理图和封装都只是两pin，求解！急！~！~！

检查下器件编号吧，是不是弄混了

1、Symbol 'CAP0603' for device 'BNC_CAP0603_AUDIO IN2' is missing pin '3'.)
CAP0603 封装没有3/4/5 pin，但是原理图中的封装有，检查原理图。
2、Could not find padstack 42X60RD29
找不到焊盘42X60RD29，检查焊盘的路径。
3、Symbol 'ND151' for device 'DIODE SCHOTTKY_ND151_ND151' has extra pin 'C'
ND151封装中pin命名为A和C，但原理图中pin命名为1和2.

原理图画好之后，要重新排列一下位号

多谢大家的热心，问题解决了~~~嗯，以后就泡这论坛了~一起学习一起提高