- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
allegro 出gerber 的问题
录入：edatop.com 点击：
(------------------------------------------------------------)
( )
( ARTWORK LOG )
( )
( Drawing : HZF7031_MB_V1.0_20120503.brd )
( Software Version : 15.51p003 )
( Date/Time : Thu May 03 21:28:16 2012 )
( )
(------------------------------------------------------------)
各位大虾请教我在出gerber 的时候出现以下问题：
提示如下：
请帮忙解决一下啊！
谢谢！
Can't open parameter file ... using default values:
DEVICE-TYPE GERBER6X00
G-CODES NO
STATIONS-PER-WHEEL 24
FILM-SIZE 24000 16000
COORDINATES ABSOLUTE
OUTPUT-UNITS INCHES
FORMAT 5.3
ABORT-ON-ERROR abort film & continue
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
OPTIMIZE YES
SUPPRESS-EQUAL YES
SCALE 1.0
WARNING: database resolution exceeds the resolution of the
output coordinates (see FORMAT in parameter file).
Some roundoff of coordinates may occur unless the number
of decimal places in the output file is increased.
ARTWORK Error reading apertures.
( )
( ARTWORK LOG )
( )
( Drawing : HZF7031_MB_V1.0_20120503.brd )
( Software Version : 15.51p003 )
( Date/Time : Thu May 03 21:28:16 2012 )
( )
(------------------------------------------------------------)
各位大虾请教我在出gerber 的时候出现以下问题：
提示如下：
请帮忙解决一下啊！
谢谢！
Can't open parameter file ... using default values:
DEVICE-TYPE GERBER6X00
G-CODES NO
STATIONS-PER-WHEEL 24
FILM-SIZE 24000 16000
COORDINATES ABSOLUTE
OUTPUT-UNITS INCHES
FORMAT 5.3
ABORT-ON-ERROR abort film & continue
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
OPTIMIZE YES
SUPPRESS-EQUAL YES
SCALE 1.0
WARNING: database resolution exceeds the resolution of the
output coordinates (see FORMAT in parameter file).
Some roundoff of coordinates may occur unless the number
of decimal places in the output file is increased.
ARTWORK Error reading apertures.
小數位數不足
可是我改了小数点位也不行啊
上传一下PCB，帮你看看
修改aperture，先delete，再add
:P:P:P:P:P:P:P:P:P
