- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
出IPC报错，怎么弄
录入：edatop.com 点击：
出IPC的时候报以下错误，应该怎么弄
Warning: Found a mechanical pin at location (-34.7880 -7.6350) with no drill - skipping.
Warning: Found a mechanical pin at location (-34.7880 8.8750) with no drill - skipping.
Error: Integer value 10000 can not be written in columns 59-62 on line 1126.
Error: Integer value 10000 can not be written in columns 59-62 on line 1216.
Error: Integer value 10000 can not be written in columns 64-67 on line 1216.
------------------------------------------
SUMMARY:
Errors: 3
Warnings: 2
Info: Most likely cause of "Integer value" errors are:
- (Most likely) Coordinates in the database exceed IPC's coordinate system.
Try setting the database origin to center the design to reduce the large
coordinate values.
- Large pad sizes. Reduce any large pad sizes.
Warning: Found a mechanical pin at location (-34.7880 -7.6350) with no drill - skipping.
Warning: Found a mechanical pin at location (-34.7880 8.8750) with no drill - skipping.
Error: Integer value 10000 can not be written in columns 59-62 on line 1126.
Error: Integer value 10000 can not be written in columns 59-62 on line 1216.
Error: Integer value 10000 can not be written in columns 64-67 on line 1216.
------------------------------------------
SUMMARY:
Errors: 3
Warnings: 2
Info: Most likely cause of "Integer value" errors are:
- (Most likely) Coordinates in the database exceed IPC's coordinate system.
Try setting the database origin to center the design to reduce the large
coordinate values.
- Large pad sizes. Reduce any large pad sizes.
建議使用 IPC-356A 欄位長度比較沒問題
建議使用 IPC-356A 欄位長度比較沒問題
我是用的IPC-356A
