- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
生成的gerber导入camnt95有问题啊
录入：edatop.com 点击：
Cannot convert the following lines in file "F:\OUTPUT GERBER\ANION7001\art_aper.txt":
Line 48: Error Creating Aperture: Width must be greater than 0.
for Dcode 49.
RECTANGLE 0.00000 0.9 0.00000 D49
Line 49: Error Creating Aperture: Width must be greater than 0.
for Dcode 59.
RECTANGLE 0.00000 1.6764 0.00000 D59
Line 62: Error Creating Aperture: Height must be greater than 0.
for Dcode 48.
RECTANGLE 0.9 0.00000 0.00000 D48
Line 90: Error Creating Aperture: Height must be greater than 0.
for Dcode 58.
RECTANGLE 1.6764 0.00000 0.00000 D58
不知道怎么回事，我的板子没有其他不规则的孔，有的只是圆形过孔。求大神帮忙...
Line 48: Error Creating Aperture: Width must be greater than 0.
for Dcode 49.
RECTANGLE 0.00000 0.9 0.00000 D49
Line 49: Error Creating Aperture: Width must be greater than 0.
for Dcode 59.
RECTANGLE 0.00000 1.6764 0.00000 D59
Line 62: Error Creating Aperture: Height must be greater than 0.
for Dcode 48.
RECTANGLE 0.9 0.00000 0.00000 D48
Line 90: Error Creating Aperture: Height must be greater than 0.
for Dcode 58.
RECTANGLE 1.6764 0.00000 0.00000 D58
不知道怎么回事，我的板子没有其他不规则的孔，有的只是圆形过孔。求大神帮忙...
是Allegro16.6版本出的Gerber么?生成NC Drill时选中Auto tool select试试！其实是不影响的！
了解
导的不是274X的gerber?
這是鏡頭檔 , 不是 Geber
Cadence Allegro 培训套装，视频教学，直观易学
上一篇：Cadence 16.6 Capture原理图放大缩小位置只在原理图中心点能不能改为光标位置
下一篇：cadence原理图里面元件有2个属性，有没办法解决？
