- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
求助导网表的问题
录入：edatop.com 点击：
我从ORCAD导入网表到ALLERO,不知为啥老是出现以下错误,文件如下:
{ Using PSTWRITER 10.0-P002Feb-09-2006 at 10:48:23 }
#1 Error [ALG0031] Pin number missing from Pin "2" of Package LED_2 , LED1: SCHEMATIC1, PAGE1_LED (101.60, 76.20). All pins should be numbered.
#2 Error [ALG0031] Pin number missing from Pin "1" of Package LED_2 , LED1: SCHEMATIC1, PAGE1_LED (101.60, 76.20). All pins should be numbered.
#3 Error [ALG0031] Pin number missing from Pin "1" of Package BUZZER_1 , BZ1: SCHEMATIC1, PAGE1_LED (185.42, 96.52). All pins should be numbered.
#4 Error [ALG0031] Pin number missing from Pin "2" of Package BUZZER_1 , BZ1: SCHEMATIC1, PAGE1_LED (185.42, 96.52). All pins should be numbered.
#5 Error [ALG0031] Pin number missing from Pin "2" of Package LED_2 , LED2: SCHEMATIC1, PAGE1_LED (127.00, 76.20). All pins should be numbered.
#6 Error [ALG0031] Pin number missing from Pin "1" of Package LED_2 , LED2: SCHEMATIC1, PAGE1_LED (127.00, 76.20). All pins should be numbered.
#7 Error [ALG0031] Pin number missing from Pin "1" of Package SW PUSHBUTTON_0 , SW2: SCHEMATIC1, PAGE1_LED (162.56, 88.90). All pins should be numbered.
#8 Aborting Netlisting... Please correct the above errors and retry.
请熟手指教！
好像是PCB的库中封装为LED_2、BUZZER_1 的器件没有管脚名或管脚名与原理图的没对应起来。查查看！
进入该元件选择edit part
找到相应的PIN 加入所缺的即可
试试看,谢谢楼上的两位！
果然可以直接找开ALLEGOR了,可是在PLACE/MANUALLY里我却不能放置零件,我记得如果放置成功的话,每个零件前面会有个小P出现,在这个里面,却是没有,在quick view里看不到任何东西，这是什么原因啊，
我估计是不是库里没有这些零件,我打开ALLEGRO去设置路径那里改路径,可是不能改,提示不能保存,请问这个又是什么原因啊,它给的那个路径,$PADPATH,这是个什么路径?是不是默认在什么地方啊,找了很久找不到,
