- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
关于覆铜的一个错误如何解决
哪位大侠帮忙解决一下,我覆铜时,在setup->drawing options->status里,out of date shape处总有“7/27”,7个错误之处,错误类型,Layer = DIGITAL GND
State: Smooth Point on shape: (350.004 20.004) Net: DGND
State: No Etch Point on shape: (369.000 4836.858) Net: DGND
State: No Etch Point on shape: (369.000 4836.858) Net: DGND
State: No Etch Point on shape: (369.000 4836.858) Net: DGND
State: No Etch Point on shape: (369.000 4836.858) Net: +1.4V_VDD
State: No Etch Point on shape: (369.000 4836.858) Net: DGND
State: No Etch Point on shape: (369.000 4836.858) Net: DGND
State: No Etch Point on shape: (369.000 4836.858) Net: DGND
错误应该就是下面的7个no etch,我把地的分割线重画了一遍还是没改过来
谁帮忙解决一下啊
怎么没人帮我回答啊,哪位大侠帮忙看看啊,先谢谢了
fill mode选smooth再updata to smooth
updata后还是报7/27, 七个错误
命令栏里Updating dynamic shape (1 of 7) Dgnd, Boundary/Digital Gnd @ (369.000 4836.858)...
Updating dynamic shape (2 of 7) +1.4V_Vdd, Boundary/Digital Gnd @ (369.000 4836.858)...
Updating dynamic shape (3 of 7) Dgnd, Boundary/Digital Gnd @ (369.000 4836.858)...
Updating dynamic shape (4 of 7) Dgnd, Boundary/Digital Gnd @ (369.000 4836.858)...
Updating dynamic shape (5 of 7) Dgnd, Boundary/Digital Gnd @ (369.000 4836.858)...
Updating dynamic shape (6 of 7) Dgnd, Boundary/Digital Gnd @ (369.000 4836.858)...
Updating dynamic shape (7 of 7) Dgnd, Boundary/Digital Gnd @ (369.000 4836.858)...
我很奇怪,为什么地层上会有+1.4V_Vdd的网络,我的地层应该都是dgnd 网络阿
在COLOR AND VISIBILITY里面打开 BOUNDARY,然后按照报错的坐标看那里是不是有多余的东西
谢谢啊,问题解决了,就是在DGND层多了点东西,我把它给删掉就OK了,多谢两位
Cadence Allegro 培训套装,视频教学,直观易学
上一篇:有POWERPCB封装转Allegro,mentor封装的工具!
下一篇:default internal的设置问题