- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
大侠们帮忙看看database check 出错！
录入：edatop.com 点击：
ERROR IN PAD STACK name = VIA
pad size does not match the extents of the pad shape, Use refresh_padstack to update padstack.
Error cannot be fixed.
ERROR IN PAD STACK name = VIA
pad size does not match the extents of the pad shape, Use refresh_padstack to update padstack.
Error cannot be fixed.
Layer TOP
ERROR IN PAD STACK name = VIA
pad size does not match the extents of the pad shape, Use refresh_padstack to update padstack.
Error cannot be fixed.
Layer BOTTOM
ERROR IN PAD STACK name = PAD156
pad size does not match the extents of the pad shape, Use refresh_padstack to update padstack.
Error cannot be fixed.
ERROR IN PAD STACK name = PAD156
pad size does not match the extents of the pad shape, Use refresh_padstack to update padstack.
Error cannot be fixed.
Layer TOP
ERROR IN PAD STACK name = PAD156
pad size does not match the extents of the pad shape, Use refresh_padstack to update padstack.
Error cannot be fixed.
Layer BOTTOM
Regenerating DRC
0 original DRC errors replaced by
0 current DRC errors.
0 warnings, 6 errors detected, 0 errors fixed.
这些过孔与焊盘我干脆就没有用到，但是还删不下去，愁死了。在setup>constraints>physical rule set>set value>available database padstacks 下无法删除，点一下pad就跑到current via list里，再点一下又回来了，鼠标按下再起来，pad就跑到另一个窗口，没有机会按下面的“删除”按钮。
呵呵
tools -> padstack ->modify design padstack -> purge
没有用到的都没啦
多谢tf_summer，问题解决了！
