求助：输出光绘时提示DATABASE ERROR！

用SPB15.2画好了一块4层板。输出光绘的时候提示：Database has errors...Please run dbdoctor！

有人遇到过这样的问题吗?请问怎么可以解决。dbdoctor怎么运行?

请高手帮帮忙，好不容易走到输出光绘这一步了！

tools-dbcheck。

好像是这个路径，很久不用了，呵呵

谢谢，我检查了

生成的DBDOCTOR错误报告里面都显示的是

ERROR IN LINE (no segment)
  LINE HAS NO SEGMENTS
  Error was fixed.

这都是什么错误呢?

不用深究，我感觉这些都是画的过程中操作不正确造成的

是cadence的数据库的特点，到了其它软件又不适用，所以不用研究的那么深

只要最后fixed就ok了。fix不了再仔细研究………………

呵呵

没有勾选CHECK DATABASE生成了一下光绘。 TOP 和BOT层都有错误。

TOP层错误摘录如下：PROCESSING FILM < TOP.art > ...
  ----------------------------------------

   Film Parameters :

      undefined line width ... 0.0
      plot wheels allowed .... 1  2  3  4  5  6  7  8  9  10 
      mirror code ..... NONE
      rotate angle .... NONE
      offset X: 0.0     Y: 0.0
      plot negative ... NO
      draw (fill) pads lacking apertures .. NO
      suppress unconnected internal pads .. NO
      make use of rotated apertures ....... NO

 WARNING: Photoplot window exceeds film size (2400.0 x 1600.0)
          stated in parameter file.

WARNING: 0 width  line found at (1650.5 4455.9)
         ... ignored！
Multiple 0 width  lines; all will be treated the same as the first.
 ERROR: Can't fill shape at (634.0, 4510.5).
 ERROR: No aperture for LINE - 18.0 at (3258.0 4569.0)
 ERROR: No aperture for LINE - 18.0 at (3258.0 4507.0)
 ERROR: No aperture for LINE - 18.0 at (3435.0 4785.0)
 ERROR: No aperture for LINE - 18.0 at (3335.5 4785.0)
 ERROR: No aperture for LINE - 18.0 at (3435.0 4785.0)
 ERROR: No aperture for LINE - 18.0 at (3435.0 4685.5)
 ERROR: No aperture for LINE - 18.0 at (3929.0 4950.0)
 ERROR: No aperture for LINE - 18.0 at (3877.0 4950.0)
 ERROR: No aperture for LINE - 18.0 at (3929.0 4950.0)

  SUMMARY OF MISSING APERTURES:
    LINE              18                           (10)               

 ... error in film, proceed to next！
 *** ERROR with TOP.art

其余几层如VCC,GND，SOLDERTOP,SLODERBOT,SILKTOP,SILKBOT只有警告。

      undefined line width ... 0.0
      plot wheels allowed .... 1  2  3  4  5  6  7  8  9  10 
      mirror code ..... NONE
      rotate angle .... NONE
      offset X: 0.0     Y: 0.0
      plot negative ... NO
      draw (fill) pads lacking apertures .. NO
      suppress unconnected internal pads .. NO
      make use of rotated apertures ....... NO

 WARNING: Photoplot window exceeds film size (2400.0 x 1600.0)
          stated in parameter file.

WARNING: 0 width  line found at (1650.5 4455.9)
         ... ignored！
Multiple 0 width  lines; all will be treated the same as the first.
 ERROR: Can't fill shape at (634.0, 4510.5).
 ERROR: No aperture for LINE - 18.0 at (3258.0 4569.0)
 ERROR: No aperture for LINE - 18.0 at (3258.0 4507.0)
 ERROR: No aperture for LINE - 18.0 at (3435.0 4785.0)
 ERROR: No aperture for LINE - 18.0 at (3335.5 4785.0)
 ERROR: No aperture for LINE - 18.0 at (3435.0 4785.0)
 ERROR: No aperture for LINE - 18.0 at (3435.0 4685.5)
 ERROR: No aperture for LINE - 18.0 at (3929.0 4950.0)
 ERROR: No aperture for LINE - 18.0 at (3877.0 4950.0)
 ERROR: No aperture for LINE - 18.0 at (3929.0 4950.0)

  SUMMARY OF MISSING APERTURES:
    LINE              18                           (10)               

 ... error in film, proceed to next！
 *** ERROR with TOP.art

其余几层如VCC,GND，SOLDERTOP,SLODERBOT,SILKTOP,SILKBOT只有警告。

你就執行一下TOOLS---DATABASE  CHECK一下

在生成光繪文件就可以了。試一下