• 易迪拓培训,专注于微波、射频、天线设计工程师的培养

9999 急啊

录入:edatop.com     点击:

#1   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'U3'. Pin edits were lost.

#2   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L5'. Pin edits were lost.

#3   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L4'. Pin edits were lost.

#4   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L2'. Pin edits were lost.

#5   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L1'. Pin edits were lost.

#6   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'CN4'. Pin edits were lost.

#7   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'CN1'. Pin edits were lost.

#8   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C40'. Pin edits were lost.

#9   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C24'. Pin edits were lost.

#10  WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C44'. Pin edits were lost.

#11  WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C41'. Pin edits were lost.

這些什么問題啊﹐什么原因引起的啊﹐﹐﹐高手﹐﹐﹐急啊

估计你的封装做的有问题

看看你的PIN脚,是不是有一些属性没有设置好

database chesk以下看看,你的零件好像都没属性了。

謝謝各位告知﹗﹗

但是﹐你們說的都有漏洞﹗

所先﹐這是導入網絡表時出的錯﹗

第二﹐其它元件(如L20)就沒有這種問題﹐所以本人認為FOOTPRINT就應該沒問題﹗況且FOOTPRINT能有什么屬性(無非就是pin要定義其各層﹐foorprint要有Label而已)

你牛!

提问题都不跟人家说是什么background,谁知道这些是什么时候出的,什么地方出的,造成什么结果啊?你说清楚了自然就好解决了。

另外,这些都是warning,没一个error,谁说是错误啦?出warning很平常,可以正常使用。

一般导网表都出warning。直接ignore

還是謝謝告知﹗﹗﹗(這都是我的錯﹐在些表示歉意)

但是﹐warning都出來﹐且不管有沒有影響﹐我至少應該warning為什么出現吧﹖---向各位高手請教了﹗﹗謝謝﹗﹗

(導NETLSIT時是會出現warning﹐但是我知道warning在哪)

Cadence Allegro 培训套装,视频教学,直观易学

上一篇:网表出错!
下一篇:ALLEGRO中如何设定零点坐标?

PCB设计培训课程推荐详情>>

  网站地图