- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
求救 高手进来吧!Allegro16.0设计的PCB
我用16.0设计了一个PCB,错误都没有了,Performing DRC...No DRC errors detected.
我先出NC drill, 正常NCLegend generation successfull
Legend 1: MANUFACTURING/NCLEGEND-1-12 ... layers TOP to BOTTOM
There were 1 drill legends generated.
然后我出gerber,可是却出现问题了,提示 database has errors, artwork generated canceled. please run DB doctor,
我运行了DB doctor,报如下的错误,
DBDOCTOR of drawing ****************************************
ERROR IN ATTRIBUTE
POINTER TO ATTRIBUTE INVALID
Error was fixed.
ERROR IN ATTRIBUTE
POINTER TO ATTRIBUTE INVALID
Error was fixed.
Regenerating DRC
0 original DRC errors replaced by
0 current DRC errors.
0 warnings, 2 errors detected, 2 errors fixed.
我再运行dbdoctor ,就正常了,能出gerber了,但是我再先出nc drill,又会出现上面的问题,大家知道是啥问题吗?
难道 没有人遇到过?
不好意思,我是个新手。今天也碰到同样的问题,来求解的。GERBER是能出,但是导入CAM350时会提示CamWare Limit exceeded.还不知道什么解决。有高手路过的话请赐教。谢谢!