- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
State: Smooth Point on shape
录入：edatop.com 点击：
第一次遇到这种情况。。
我在敷铜完成以后，在Setup下的Drawing Option,中的Out of date shapes中显示1/87打开log看里面有很多的error,
如下：
Dynamic shapes out of date: 1 out of 87
Current fill mode : SMOOTH
Layer = TOP
State: Smooth Point on shape: (2659.505 155.495) Net: DGND
State: Smooth Point on shape: (243.000 242.000) Net: DGND
State: Smooth Point on shape: (1093.000 -223.000) Net: DGND
State: Smooth Point on shape: (2250.000 1493.000) Net: DGND
State: Smooth Point on shape: (-153.417 394.417) Net: +5V_COREM
State: Smooth Point on shape: (124.000 113.000) Net: N36234168
State: Smooth Point on shape: (462.346 38.417) Net: ENB3V3
State: Smooth Point on shape: (875.000 173.417) Net: N36272249
State: Smooth Point on shape: (785.000 118.417) Net: N36264294
State: Smooth Point on shape: (402.346 65.417) Net: N36234386
我将top层的Boundry层打开，敷铜没有问题，也没有多余的铜，
还试过将Point on shape的那个位置的铜进行修改，但是还是无法解决，
在这里请教各位大侠帮忙解决下，谢谢先。
我在敷铜完成以后，在Setup下的Drawing Option,中的Out of date shapes中显示1/87打开log看里面有很多的error,
如下：
Dynamic shapes out of date: 1 out of 87
Current fill mode : SMOOTH
Layer = TOP
State: Smooth Point on shape: (2659.505 155.495) Net: DGND
State: Smooth Point on shape: (243.000 242.000) Net: DGND
State: Smooth Point on shape: (1093.000 -223.000) Net: DGND
State: Smooth Point on shape: (2250.000 1493.000) Net: DGND
State: Smooth Point on shape: (-153.417 394.417) Net: +5V_COREM
State: Smooth Point on shape: (124.000 113.000) Net: N36234168
State: Smooth Point on shape: (462.346 38.417) Net: ENB3V3
State: Smooth Point on shape: (875.000 173.417) Net: N36272249
State: Smooth Point on shape: (785.000 118.417) Net: N36264294
State: Smooth Point on shape: (402.346 65.417) Net: N36234386
我将top层的Boundry层打开，敷铜没有问题，也没有多余的铜，
还试过将Point on shape的那个位置的铜进行修改，但是还是无法解决，
在这里请教各位大侠帮忙解决下，谢谢先。
有没有遇到过这种情况的啊，请指导一下。。
还没有解决！
明白了！有些问题还是要反复的去看哦
