• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > CST > CST使用问答 > Problem in placing the waveguide for a CAD model SMA connector in CST

Problem in placing the waveguide for a CAD model SMA connector in CST

录入:edatop.com     点击:
how to excite a SMA connector using waveguide port in CST for an imported CAD model SMA connector?I have designed an 10Ghz Rectangular Patch Antenna. For that I have used an SMA connector which is imported as an STEP/IGES file. Now the problem is I couldn't achieve the S-Parameter due to the improper excitation of waveguide port. So kindly let know where the waveguide port should be placed in order to achieve the S-Parameter.

Select the face of the outer conductor ( or inner conductor) of it and I placed the WG port using this pick. The signal in a coaxial line is defined by the E field in between the two conductors, that means that the voltage inside the inner conductor is 0 (pec) and the voltage inside the outer conductor is also 0.However there is a difference in voltage BETWEEN those conductors. Therefore, to create a wave in this line you have to create a different voltage between the outer an the inner conductor, so the wg port should cover at least a portion of both conductors

申明网友回复良莠不齐,仅供参考。如需专业解答,请学习易迪拓培训专家讲授的CST视频培训教程

上一篇:Which type of setup solver to use in CST ?
下一篇:Optimisation of helical antenna in CST

CST培训课程推荐详情>>

  网站地图