- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
Help a new CST user with microstrip antennas simulation
录入:edatop.com 点击:
Hello, guys,
I am a new CST user, and I am learning it replicating experimental results from articles and I've had problems with a rectangular microstrip antenna from the attached article. I chose the configuration a = 1.7 cm and b = 1.1 cm. The first result I am comparing to the simulation is impedance vs. frequency (figure 2 in the article), but I can't reach it. I would like to share with you the project I designed and the simulation results so you can give me tips.
Thank you!
I am a new CST user, and I am learning it replicating experimental results from articles and I've had problems with a rectangular microstrip antenna from the attached article. I chose the configuration a = 1.7 cm and b = 1.1 cm. The first result I am comparing to the simulation is impedance vs. frequency (figure 2 in the article), but I can't reach it. I would like to share with you the project I designed and the simulation results so you can give me tips.
Thank you!
申明:网友回复良莠不齐,仅供参考。如需专业解答,请学习易迪拓培训专家讲授的CST视频培训教程。
上一篇:the mouse 3D model of laboratory for CST or HFSS simulation
下一篇:import result from CST to MATLAB with ascii code when using floquetprot