- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
[CST MW] Need help about bowtie antenna simulation in CST MW
录入：edatop.com 点击：
Hello,
I have problem when tried to simulate the bowtie antenna.
My purpose is the S(1,1) and the impedance of antenna.
But the result seem incorrect.
Please help me to find out the incorrect point.
Thank you all!
Below is the dimension of bow-tie antenna:
L = lambda/2 = 38mm (f = 2.2GHz)
W = 11.5 mm
I've used discrete port to feed (Please refer the image attached).
I have problem when tried to simulate the bowtie antenna.
My purpose is the S(1,1) and the impedance of antenna.
But the result seem incorrect.
Please help me to find out the incorrect point.
Thank you all!
Below is the dimension of bow-tie antenna:
L = lambda/2 = 38mm (f = 2.2GHz)
W = 11.5 mm
I've used discrete port to feed (Please refer the image attached).
discrete port should give good results. is the port placed at the center of the phase?
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。
上一篇：How to make a curved body using the arc feature in cst
下一篇：CST simulation for grounded CPW
