- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
E-field around a straight wire in CST
录入:edatop.com 点击:
I have a pretty simple question, as I'm still pretty new to CST.
I want to look at the E-field surrounding a straight insulated wire (just copper with a Teflon insulating coating) within a dielectric material (sea water, for example). The trouble I'm having is how to excite the wire. I want to use a discrete port so I can control the voltage input, but how can I connect the two ends of the wire with a discrete port?
The wire is 10 cm in length, and if I try to directly connect the ends with a discrete port, the simulator complains that the port is within PEC and fails.
Any help would be much appreciated! If need be, I can supply pictures/files of my setup.
Thanks!
-shmiv
I want to look at the E-field surrounding a straight insulated wire (just copper with a Teflon insulating coating) within a dielectric material (sea water, for example). The trouble I'm having is how to excite the wire. I want to use a discrete port so I can control the voltage input, but how can I connect the two ends of the wire with a discrete port?
The wire is 10 cm in length, and if I try to directly connect the ends with a discrete port, the simulator complains that the port is within PEC and fails.
Any help would be much appreciated! If need be, I can supply pictures/files of my setup.
Thanks!
-shmiv
申明:网友回复良莠不齐,仅供参考。如需专业解答,请学习易迪拓培训专家讲授的CST视频培训教程。
上一篇:how to model a ground plane on CST MWS
下一篇:Energy and Balance in CST Mirowave Studio