Question about CST thermal-co simulation

Dear all

I encountered a problems after use thermal simulation after microwave simulation. Results are shown in attached file.

Conditions:
1. discrete port, gaussian excitation
2. open add space boundary
3. background temperature 293 K
4. defined thermal loss : f = 428.57 THz, power scaling factor 0.01
5. heat time 0.1 ns

finally, i got 1D and 3D results but these results are mismatch.
Temperature each time is unequal. Maximum temperature are the same time at 0.102 ns.

1D result at (0,0,0) location
../imgqa/eboard/EM/EM-ogg3q4qmzfc.png
3D result at maximum (0.102 ns) (center of red area is (0,0,0))
../imgqa/eboard/EM/EM-1n5cy4d2xab.png

So, My question is:
1. Do these results is in the same scale ?
2. In 3D result shows maximum 3-D 931.205 at -329.414 / -329.414 / -419.414 . What's that mean ? My model only -250 to 250 nm in x and y direction,
and -215 to 0 nm in z direction.

best regards,
sidworldcup

ps. Sorry for my bad english.

申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。