- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
simulation problem in cst 2010
录入：edatop.com 点击：
Hello,
Me and my partner are in our final year of b.sc degree, and we are doing a final project.
the project involves simulating a model which includes several hybrid couplers connected to a 3db power splitter (in general-it's a six port network).
We constructed the model in cst design studio and made s-parameters and z-parameters on various frequency ranges, along with swr simulations.
Now our instructor wants us to have an electomagnetic simulation before we take the model to further optimization and rpoduce it in smt machine.
my question is-must we construct each of the blocks (hybrid couplers,3db splitter,etc..) in the cst em studio and connect them seperately, or can we export the entire model to cst em-studio immedietly?
we tried to export the model to cst em-studio but got an error in the final stages of the simulation:
aplac version is older than 7.91.
when we tried (in the cst design-studio) to make a 2d model to a hybrid coupler in the 0.3-3ghz range we couldn't get it either because of the same error.
another question i have to ask:
in the cst em-studio,we found pre-made models (examples).
we have found a hybrid coupler, like the ones we use in our design. can we "copy and paste" this model to a 3db coupler in the em-studio (thus-saving a lot of time), or must we construct each and every coupler and somehow incoroprate them into a new em-simulation?
I can attach an image or a file of the device of anyone thinks he can succeed in transferring it as a whole to em-studio.
thank you very much
Matan.
Me and my partner are in our final year of b.sc degree, and we are doing a final project.
the project involves simulating a model which includes several hybrid couplers connected to a 3db power splitter (in general-it's a six port network).
We constructed the model in cst design studio and made s-parameters and z-parameters on various frequency ranges, along with swr simulations.
Now our instructor wants us to have an electomagnetic simulation before we take the model to further optimization and rpoduce it in smt machine.
my question is-must we construct each of the blocks (hybrid couplers,3db splitter,etc..) in the cst em studio and connect them seperately, or can we export the entire model to cst em-studio immedietly?
we tried to export the model to cst em-studio but got an error in the final stages of the simulation:
aplac version is older than 7.91.
when we tried (in the cst design-studio) to make a 2d model to a hybrid coupler in the 0.3-3ghz range we couldn't get it either because of the same error.
another question i have to ask:
in the cst em-studio,we found pre-made models (examples).
we have found a hybrid coupler, like the ones we use in our design. can we "copy and paste" this model to a 3db coupler in the em-studio (thus-saving a lot of time), or must we construct each and every coupler and somehow incoroprate them into a new em-simulation?
I can attach an image or a file of the device of anyone thinks he can succeed in transferring it as a whole to em-studio.
thank you very much
Matan.
check this out
A waveguide cavity 180° hybrid coupler with coaxial ports - Navarrini - 2009 - Microwave and Optical Technology Letters - Wiley Online Library
Directional couplers, Hybrids, Magic tees, Phase shifters, Attenuators, Terminators :: HARDWARE
http://www.aoc.nrao.edu/evla/admin/r..._OMT_Oct09.pdf
best regards
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。
上一篇：CST conformal array design
下一篇：How to add watch for smith chart plot in CST 5?
