<CST> Defining Ports and B.C. for a power splitter &lt

Hi All,

Background story:

I'm designing a 2-way power splitter and would like your comments/advices about some issues i've encountered.

First of all, the splitter is a "standard" wilkinson power splitter, using a 50 ohm microstrip line on a grounded dielectric slab.

After building th model, adjusting the mesh and defining waveguide ports, i've conducted several simulations, each with different Boundary Conditions (B.C.).
1st. All electric BC ( as CST recommends for this type of models )
2nd. All open BC (Tight)
3rd All open expanded,
4th All electric with full de-embedding.

The problem :

Each simulation gave different results from the others !
I understand that there's a difference between theory and "real world" and some optimization has to b made, but....the same splitter resonates at 4GHz in the 1st and at 5GHz at the 2nd simulation....

Can you help ?

BTW: I made sure same mesh density and port impedance is kept , especially at the 3rd simulation.

Obviously BCs do matter and obviously changing the BCs affect the resonant frequency. In real world the splitter would go into a package and hence CST recommends using Perfect E BCs. I do not have any problem with your results.

-svarun

申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。