- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
CST Microwave Problem - Questioning Error
录入：edatop.com 点击：
Hi,
I have a problem. I am simulating a structure w/ a waveguide port. S11 parameter is linearly higher than 1 when I use open (add) space Boundary condition. Physically not meaningful due to energy conservation.
But, when I use open Boundary Conditions, this time I obtain an error as:
" Inhomogeneous material at open boundary detected. (The structure must be identical in the open boundary plane and the next two mesh steps. ) "
Can anyone help me w/ this problem.
Thanx in advance.
I have a problem. I am simulating a structure w/ a waveguide port. S11 parameter is linearly higher than 1 when I use open (add) space Boundary condition. Physically not meaningful due to energy conservation.
But, when I use open Boundary Conditions, this time I obtain an error as:
" Inhomogeneous material at open boundary detected. (The structure must be identical in the open boundary plane and the next two mesh steps. ) "
Can anyone help me w/ this problem.
Thanx in advance.
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。
上一篇：cst error：Port "1" is inhomogeneously filled within the first 3 mesh cells.HELP
下一篇：CST - change permitivity
