CST MWS如何查看损耗在各个材料中的分配

计算了一个结构材料，由自定义的Lossy metal和Lorentz model的电介质2种材料构成，用时域算完以后用后处理计算了在2个吸收频率处的Thermal losses，结果如下（8个结果对应8个场监视器）：

Computed 8 thermal loss distributions.
-----------------------------------------------------------------------------------
1: current (f=1.088)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic Current
Loss Type : Electric Volume Loss
Total Loss: 2.461336e-001 W (rms)

2: current (f=1.148)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic Current
Loss Type : Electric Volume Loss
Total Loss: 2.535106e-001 W (rms)

3: e-field (f=1.088)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic E-Field
Loss Type : Electric Volume Loss
Total Loss: 2.461336e-001 W (rms)

4: e-field (f=1.148)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic E-Field
Loss Type : Electric Volume Loss
Total Loss: 2.535107e-001 W (rms)

5: h-field (f=1.088)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic H-Field
Loss Type : Surface Loss
Total Loss: 2.269823e-001 W (rms)

6: h-field (f=1.148)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic H-Field
Loss Type : Surface Loss
Total Loss: 2.245989e-001 W (rms)

7: loss (f=1.088)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic Loss density
Loss Type : Electric Volume Loss
Total Loss: 1.877123e-001 W (rms)

8: loss (f=1.148)_1,1
Solver: Transient solver
Grid: Hex
Field Type: Dynamic Loss density
Loss Type : Electric Volume Loss
Total Loss: 1.934078e-001 W (rms)

不知道怎么看损耗在金属和介质中的分配情况啊？难道Electric Volume Loss就是指介质的热耗散，Surface Loss就是指金属的焦耳热？（帮助里的两个公式实在不明白。）而且7、8计算的loss又是什么呢，如果是总消耗怎么数值比前面个都要小？求高手指点。

申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。