- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
CST 中waveguide port的设置问题
录入：edatop.com 点击：
请问在CST中采用waveguide port源时，有如下提示：
waveguide port is too short, the waveguide must be homogenous for at least three mesh planes along propagation direction.
我能看懂上面的意思，但是我设置的波导口前的微带线很长了啊，为什么还提示我这个有问题？究竟问题出在什么地方？
谢谢。
waveguide port is too short, the waveguide must be homogenous for at least three mesh planes along propagation direction.
我能看懂上面的意思，但是我设置的波导口前的微带线很长了啊，为什么还提示我这个有问题？究竟问题出在什么地方？
谢谢。
Try to enlarge the size of the waveguide port.
By simulating many times, I found the reason that the materials defined in the simulation are not homogenous along the waveguide port propagation direction, for instance, two materials are overlapping by mistake.
能不能用汉语简单的说说整个仿真的步骤
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的CST视频培训教程。
上一篇：cst如何用曲线画一个面？
下一篇：CST2009的并行计算
